Sunday, October 21, 2007

 

Painting the Engine Room - Part 2

A few years ago, I repainted Yellowbird's upper engine cowling. The project began as an exercise in removing corrosion from the unpainted inner surface of the cowling, but scope creep took over when I realized that the newly cleaned and repainted insides looked noticeably better than the outside, on which a 15 year old repaint and a few subsequent touchups had left several different interpretations of Cessna's original colors. Rather than repaint the entire cowling, I masked off the trip stripes and after sanding and filling some blemishes, I applied a fresh solid coat of white over the weathered base coat. It looked good, maybe not as good as a professional paint shop, but it looked like it could suffice until the budget allows a complete Yellowbird Makeover.

Since then I've had my eye on the lower cowling, which could benefit from the same treatment, but a couple of factors have kept me from starting the project. For one, the lower cowling is significantly larger than the upper, more complex, and far dirtier. Where the upper cowling took a few days spread over two otherwise unflyable winter weekends, the lower would require a greater time commitment. For another, while I could get away with not repainting the trim colors on the upper cowling, (they only amount to a few square inches at the bottom edge), I will have to repaint the trim on the lower, since the stripes cover a significant amount. That means finding a match for Cessna's fashionable and exciting 1794 color palette. I'd heard that any reputable paint show could provide a match, but procrastination, inertia, and the general reluctance to start such a major project kept me from pursuing the matter further.

Now, there are no more excuses. Yellowbird is in the shop to have a cracked crankcase repaired, and the latest word is that it may be another month or so before she's back together. I'd rather be flying, but since I can't, I might as well take the time to get this project finished. I've already done the interior, now it's time to tackle the exterior.

Cessna 177B Cardinal lower engine cowlingThe paint on the lower cowling wasn't as patchy as the upper was before its restoration, but years of propwash have left it battered and scarred form rocks and debris. The damage extended to the fiberglass nosebowl, which was chipped and cracked in places. After cleaning and sanding the exterior, I've used Aeropoxy filler to patch the damaged fiberglass and fill some rivet dimples. Glazing putty fills the lesser chipped spots.

Cessna 177B Cardinal lower engine cowling, disassembledThere was some corrosion under the paint, particularly around the cowl fasteners and exhaust opening. The Scotch-Brite wheel removes the paint and corrosion, and the resulting bare patches are treated and primed.

Cessna 177B Cardinal engine cowlings and spinnerI could have stripped the entire cowling, but then I'd have to relocate and mask the trim stripes. It's much easier to leave the old paint on and use the existing demarcation lines to place the masks. Just to be sure that they'll match up with the rest of the airplane, I've brought the upper cowling home to help locate the masks. I didn't need to put the spinner on top, but It's been a while since I've been able to admire the graceful lines of a Cardinal nose.

Cessna 177B Cardinal lower engine cowling, masked for paintingMasks in place for painting the base coat. I normally use old issues of Atlantic Flyer for masking, but all the FBO had were some LSA brochures. They'll do, but I miss reading Smilin' Jack. And I'm getting used to having airplane parts in the dining room.

color match for Cessna Tiger Yellow paintAfter carrying one of the tailcone access panels around to four different paint stores, I was despairing of ever finding a match for Cessna's Tiger Yellow. It's a dark yellow, but still very strong. Every place that tried to match it came up with something close in overall hue, but noticeably muddy. Adding measured amounts of black, red and green pigments to the basic yellow darkened it, but also toned it down. Even with computer matching, the closest they could do was a mustard yellow. Finally, I found a shop that specializes in paint matching for auto body shops. Whatever they had, it did the trick. Armed with a quart of fresh Tiger Yellow and a pint of Summer Gold, I was ready to paint.

Cessna 177B Cardinal lower engine cowling, with trim stripes paintedThe base coat is done and masked, and the trim goes on. It's a two-part acrylic enamel, and I tried a few test sprays on an old bookshelf before painting in earnest.

REpainted Cessna 177B Cardinal lower engine cowlingBoth colors painted, and masks removed. There's some overspray to touch up, but it's looking pretty good so far.

Cessna 177B Cardinal upper engine cowling with repainted trim stripesI might as well do the trim on the top while I'm warmed up.

Restroed Cessna 177B Cardinal lower engine cowlingBack together and all polished up. This is a good time to replace the hardware so she gets fresh Southco cowl fasteners and new screws for the landing light housing. Compare to this.

Cessna 177B Cardinal lower engine cowlingI wish I had a good picture of the lip area before it was rebuilt. This really looks good. I'm feeling pretty smug about my painting talents.

Interior of Cessna 177B Cardinal lower engine cowlingThe inside, nice and clean and shiny. You could eat off of this cowling.

Cessna 177B Cardinal cowling mounted dual landing light housingThe landing lights get all new gaskets and hardware. I'm still trying to track down the small #6 speed nuts that hold the brackets together (I was missing one, and two others were cracked). The part number in the Cessna parts catalog doesn't show up in any of the local shop's catalogs and an online search turned up only one outfit that never responded to my inquiry. I'll keep looking, but until I find replacements, I may use #6 machine screws and stop nuts.

Restored 1974 Cessna 177B Cardinal nosewheel fairingAnd at last, the nosewheel pant is finished.

Well, that's it for the home projects. I've done as much as I can - now all that's left to do is sit back and wait for my engine.


Friday, October 12, 2007

 

Bachelor Life

Cessna 177B Cardinal cowl flaps in the sink of a bachelor kitchenIt's Friday night, I don't have a date - I think I'll stay home and wash my cowl flaps.


Monday, October 08, 2007

 

Painting the Engine Room - Part 1

The engine has been delayed, thanks to some administrative confusion at the rebuild shop where it was sent. They have yet to start the repair, so I can't expect to be airborne again until November at the earliest. The shop has promised to expedite the process, and I won't pressure them beyond that. I'd rather have this done carefully and methodically, without rushing or cutting corners to meet an arbitrary deadline. I'm not too happy about this, but I'll manage.

And the best way to do that is to come up with another project. A couple of years ago I filled a long winter break with my first real Bachelor Kitchen project, which involved repainting the upper engine cowling. It turned out pretty decently, and I've been eyeing the bottom cowl ever since. The bottom is a more complicated process, since it involves the landing light housing and cowl flaps, and some damage to the fiberglass nosebowl adds even more work. And on top of that, repainting the exterior will mean finding a match for Cessna's Tiger Yellow and Summer Gold trim colors. I have at least a month to play with, so let's get started.

Interior of Cessna 177B Cardinal lower engine cowlingHere's what we have to work with. There's a lot more cooked oil on the bottom end then there was on the top, and despite occasional oil baths from assorted leaks, there's plenty of surface corrosion. Scrubbing this clean is going to be a chore. At least I won't have to do it in the kitchen.

Interior of Cessna 177B Cardinal lower engine cowlingThere's grime all around, and lots of places for it to hide. there's even a spot where the skin has been worn down slightly by the spiral steel wire in the carburetor air duct. When the new SCAT goes in, I'll make sure that there's not enough slack to let that happen again.

Cessna 177B Cardinal lower engine cowling, disassembledDisassembly comes first. A dozen or so screws hold the landing light housing in place, and the cowl flaps come out nicely when the hinge pins are removed.

Interior of Cessna 177B Cardinal lower engine cowling after cleaningAfter several days of scrubbing with Alumiprep and Scotch-Brite, the aluminum looks like aluminum again. There's still a ways to go, but it's a nice feeling seeing this much improvement.

Cessna 177B Cardinal lower engine cowling during Alodine treatmentThe Bachelor Bathtub is as good a place as I'll find for applying the Alodine treatment. You married guys wouldn't be able to get away with this sort of behavior.

Cessna 177B Cardinal dual cowl mounted landing light bezelsScotch-Brite wheels in the drill make short work of the rust and crust on the landing light brackets. They do a good job of removing skin from the shins, too. Don't ask me how I know that.

Interior of Cessna 177B Cardinal lower engine cowling after primer coatAfter a few more days of shin skinning work, the innards are primed.

Interior of Cessna 177B Cardinal lower engine cowling being repaintedA few coats of Engine Room White, and it's starting to look seaworthy. It will take a few more coats, but first we'll deal with some fiberglass repair.

Repairing damaged lower cowl lip of Cessna 177B CardinalAt some time before I met her, Yellowbird's cowl snubber bracket went missing. Untold hours in the air allowed the lower cowl lip to chafe against the spinner bulkhead, wearing away most of the lip. The snubber bracket was replaced at our first annual, but the damaged lip has defied treatment until now. It took a few tries to figure out how to rebuild it. In the end, I took a length of aluminum strip, bent it to match the radius of the top cowl opening, and used it as a form over which fiberglass cloth and resin were molded.

Cessna 177B Cardinal lower cowl lip and snubberAfter trimming the excess, I filled any gaps with Aeropoxy filler. It matches the original dimensions pretty well. I also used the fiberglass cloth to reinforce the area around the snubber.

Cessna 177B Cardinal dual cowl mounted landing light housingThis is the landing light housing. Interestingly, it's a steel stamping, instead of aluminum. I stripped it inside and out, primed and painted.

Cessna 177B Cardinal dual cowl mounted landing light housingFor variety, I painted the inside with the same high-temperature aluminum paint that I used on the engine baffles. This part sits right under the muffler, so it's exposed to some heat.

Painting the exterior is going to be a task. I'll have to do some body work, mask the trim stripes, paint, polish, and finally put everything back together. Stay tuned...